Other settings, Switching active source mode, Sleep timer – Philips HTS3306/F8 User Manual
Page 46
EN - 46
13. OTHER SETTINGS
13.1. Switching Active Source Mode
You can change the active source mode to the desired
external audio inputs and enjoy audio from the connected
device with the multi-channel surround sound capabilities.
Press [SOURCE] repeatedly to select the desired source
mode.
“Aux”:
Set the active source mode to the AUDIO IN (AUX).
“Coaxial”:
Set the active source mode to the DIGITAL AUDIO IN
(COAXIAL).
“MP3 Link”:
Set the active source mode to the MP3 LINK.
13.2. Sleep Timer
The sleep timer enables the unit to switch to the standby
mode automatically after the selected preset time.
To set the sleep timer:
Press [SLEEP] repeatedly to select the desired
preset time.
“SLP¬Off”:
Turns off the sleep timer.
“SLP¬15min.”:
Set the preset turn-off time to 15 minutes.
“SLP¬30min.”:
Set the preset turn-off time to 30 minutes.
“SLP¬60min.”:
Set the preset turn-off time to 60 minutes.
“SLP¬90min.”:
Set the preset turn-off time to 90 minutes.
“SLP¬120min.”:
Set the preset turn-off time to 120 minutes.
“SLP¬150min.”:
Set the preset turn-off time to 150 minutes.
To check or change the setting:
Press [SLEEP] once to display the remaining time.
To change the setting, press [SLEEP] repeatedly until
your desired preset time is displayed.
To cancel sleep timer:
Press [SLEEP] repeatedly until “SLP¬Off” is displayed.
D Note
•
The sleep timer will be activated even if the unit is in
operation.
•
Pressing [SLEEP] does not work while the setup
menu is displayed.
'&A'0AXDQQM2CIG/QPFC[#WIWUV2/