ParaBody 440 - Manual (Page 21)

21
0 1 2 3 4
1/2 1/2 1/2 1/2
STEP 26
• Assemble four ROLLER PADS (31) to the LEG CURL/EXTENSION (4) as shown on FIGURE 26 using two 16” TUBES (30) and four
STARLOCK COLLARS (73).
FIGURE 27
• Assemble two ROLLER PAD (31) to the tubes on FRAME SUPPORT (1) using two STARLOCK COLLARS (73) as shown in FIGURE 26..
STEP 27
• Assemble one 3-1/2” PULLEY (79) to the FLOATING PULLEY
BRACKET (22) using one 3/8 X 1-3/4” BOLT (36) and one 3/8”
LOCKNUT (48) as shown in FIGURE 27.
36 3/8 X 1-3/4”
4
73
30
31
48
79
22
FIGURE 26
1