Philips CDR775 S - Manual (Page 22)

English
22
The CD-SYNC feature enables you to make fast and easy
recordings of a CD. Track increments are automatically detected
from the source material. Track increments cannot be added
manually. In analog source material a silence of 2.7 seconds or
more is automatically detected as a track increment.
Preparing for autostart recording
1 Make sure the disc is absolutely free of scratches and dust
particles.
2 Press EXT(ernal) SOURCE repeatedly until (depending on the
digital connection used):
➜ DIGITAL I, OPTICAL I or ANALOG lights up and
DIGITAL 1, OPTICAL or ANALOG will appear on
the display.
3 With the CD recorder stopped, press REC TYPE four times
if you wish to record a complete disc or program.
➜ d and
SYNC will start to flash and the display will show
REC EXT DISC and WAIT followed by the track
number, the total remaining time and
START SOURCE.
• If input label (DIGITAL I) flashes, the digital connection is
incorrect.
Start recording
1 To start recording, press PLAY on the selected source.
➜ The CD recorder automatically starts to record and d
lights up continuously. The track number and track time
will appear on the display.
• If, however, you start the source during a track, CD-SYNC
recording starts at the beginning of the next track or after
2.7 seconds of silence in analog recordings.
• To check the remaining recording time on the CDR(W), press
DISPLAY. (This can also be done during recording.)
• The EASY JOG/ENTER key can be used to adjust the
recording level.
• The recorder stops automatically.
2 To stop recording manually, press STOP on the CD recorder.
➜ UPDATE lights up and
SYNC and d go out.
• If STOP 9 is pressed within 3 seconds after pressing PLAY,
no recording will take place.
• To interrupt recording, press PAUSE on the CD recorder.
➜ d starts to flash. (Autostart recording is disabled.) To
resume, press RECORD on the CD recorder.
After recording the display will show UPDATE for several
seconds.
Note:
- Recordings from DAT, DCC or analog sources will only stop
after 20 seconds of silence.
- Auto track is always active.
Important:
If you want to play the recorded CDR disc on a regular
CD player, it must be finalized. See finalizing discs.
Finalized CDRW discs play only on CDRW compatible
CD players.
For recording from CD changers always use
REC EXT
DISC.
REM TRACK REC TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
CHANGER
SYNC MANUAL RECORD
REM TOTAL
ALL
TRACK
TIME STEP TRACK
CD
RW
REM TRACK REC TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
CHANGER
SYNC MANUAL RECORD
REM TOTAL
ALL
TRACK
TIME STEP TRACK
CD
RW
OPEN / CLOSE PLAY / PAUSE STOP REC
TYPE
OPEN / CLOSE PLAY / PAUSE STOP EXT
SOURCE ERASE FINALIZE
CDR
RECORD
PHONES DISPLAY SCROLL DJ MODE REPEAT SHUFFLE PROG
CDR 77X AUDIO CD RECORDER
ANALOG RW
Autostart recording from external CD player
CD-SYNC
RECORDING