PYLE Audio PLRG23C - Manual (Page 2)

P / N : 570-281804-03
Page. 2
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
1. POWER ON/OFF
Press the button to turn the power "ON" or "OFF".
2. MODE CONTROL
Press this button to select in either radio or cassette or CD changer mode.
3/4. MANUAL UP / DOWN TUNING TRACK SEEK UP / DOWN CONTROL
On radio mode, press this button will tune one frequency step higher or lower. On CD
mode, press this button will locate the beginning of the track being played or will locate
the beginning of the next track. When pressing more than 2 seconds, it will allow you to
seek up or down on the specific track.
5. EJECT BUTTON
Depressing the eject button will stop the tape play, eject the cassette and turn on the
radio.
6. TAPE SLOT
Holding the cassette lengthwise insert into the tape slot. The tape mechanism will now
engage into the cassette play model.
7. LCD DIGITAL DISPLAY
The unit utilizes a digital type display which shows numerical indication of station
FREQUENCY and other FUNCTIONS.
8. CLOCK
During radio operation, press this button to call the time display on the incorporated
quartz clock. Pressing the button again or activating any tuning function, will return the
display to station frequency read-out. During the tape operation, the time display will
always be shown.
SETTING CLOCK TIME
1. Press CLOCK button until the clock timing is flashing.
2. Press
tuning button to set the HOUR or press tuning button to set MINUTES.
9. PANEL RELEASE BUTTON
This button is used to release the mechanism that holds the front panel to the chassis.
To detach the front panel, press the button so that the right side of the panel is
released. Grasp the released side and pull it off of the chassis. To re-attach the panel,
position the left side of the panel in place first and then press the right side of the panel
until the mechanism locks it into place.
10. MONO/STEREO CONTROL
Press this button to select "FM STEREO" or "MONO" reception. A display reading of
"ST" indicates the "STEREO" mode is selected.