Philips 19C5808E - Manual (Page 23)

E
N
23
Troubleshooting
Having trouble? Something not working? Before calling for help, try these
suggestions.
H AVING THIS PROBLEM? C HECK THESE ITEMS
No Picture Make sure the Power cable is plugged
(Power LED not lit) into the wall outlet and into the back of
the monitor.
The power button on top of the monitor
should be in the ON position.
Disconnect the monitor from the power
outlet for about one minute.
No Picture Make sure the computer is turned on.
(Power LED is amber Make sure the monitor cable is or
yellow.) connected properly to your computer.
Check to see if the monitor cable has
bent pins.
The Automatic Power Saving may be
activated.
No Picture Make sure the Brightness and Contrast
(Power LED is green.) controls are set correctly.
Make sure the monitor cable is
connected properly to your computer.
Check to see if the monitor cable has
bent pins.
Make sure the computer power is on.
Screen says Make sure the monitor cable is connect
properly to your computer.
Check to see if the monitor cable has
bent pins.
when you turn on Make sure the computer is turned on.
the monitor.
S YNC I NPU T NO