Philips DTR1000 - Manual (Page 8)

English
Español
6 PRODUCT DESCRIPTION
3.2 Rear view
1 VCR (SELV): SCART (1) socket to connect your video recorder.
2 Digital audio output (SELV): Coaxial Digital audio output to connect your HIFI /
Audio receiver system.
3 Serial (SELV): RJ 9 socket for serial data transfer during servicing.
4 AERIAL IN (SELV): Input to connect your UHF aerial.
5 230 V ~ 50 Hz 10 W max (HV): Socket to connect the Mains cord.
6 Label showing the type and serial number of the receiver.
7 TV (SELV): SCART (1) socket to connect to your TV set or a video
projector (2).
8 L/R Audio out (SELV): Left/Right audio-cinch outputs to connect your HIFI / Audio
receiver system.
9 RF out (SELV): RF output to be connected to the aerial input of your Video
Recorder or TV set, refer to chapter 5 for recommended
connection diagrams.
(1) SCART is also called Euroconnector or Peritel.
(2) To connect a video projector to the TV SCART socket refer to chapter 5.4.
SELV : Safety Extra Low Voltage.
HV : Hazardous Voltage.
5 6 7 8 9
1 2 3 4