PYLE Audio PLCD15MR - Manual (Page 12)

12
GENERAL
Power Supply Requirements : DC 12 Volts, Negative Ground
Chassis Dimensions : 178 (W) x 178 (D) x 50 (H) mm
Tone Controls
- Bass (at 100 Hz)
:
± 10 dB
- Treble (at 10 KHz) :
± 10 dB
Maximum Output Power : 4 x 40 Watts
Current Drain : 15 Ampere (max.)
CD PLA YER
Signal to Noise Ratio : More than 55 dB
Channel Separation : More than 50 dB
Frequency Response : 40 Hz - 18 KHz
RADIO
FM
Frequency Coverage : 87.5 to 107.9 MHz
IF : 10.7 MHz
Sensitivity (S/N = 30 dB) : 3
µV
Stereo Separation : > 30 dB
AM
Frequency Coverage : 530 to 1720 KHz
IF : 450 KHz
Sensitivity (S/N = 20 dB) : 32 dBu
SPECIFICATION