Proxima ASA Multimedia LCD Projectors - Manual (Page 46)

3–6 • User’s Guide
Chapter 3 • Using the Desktop Projector
VOLUME
Use this setting to adjust the volume. Use the up or down arrow
key to increase or decrease the volume level.
Note: For optimal sound control when using an external
amplifier (such as a stereo system), preset the VOLUME setting
to 50% (5 bars) before adjusting the volume on the amplifier to a
comfortable listening level.
RGB Controls: RED, GREEN & BLUE
The RED, GREEN and BLUE controls are used to individually
adjust the color signals. Use the up or down arrow key to increase
or decrease the color signal level. These settings are simultaneously
increased or decreased when the BRIGHTNESS control is
adjusted.
TINT
The TINT setting (R and G) adjusts the Red or Green color
balance for NTSC/PAL/SECAM video or S-video sources. It has
no effect in other video modes. Use the up or down arrow keys to
adjust the color signal balance.
SIG LEVEL
The SIG LEVEL setting is used by Audio/video-enabled models
for NTSC/PAL/SECAM or S-VHS video contrast adjustment.
Use the up or down arrow key to adjust the contrast in the
projected image.
Note: If you would like to add video to audio-enabled models,
you can order the Video Adapter Kit (A195). See Appendix B for
ordering information.