Connecting the units – Pioneer AVH-P7850DVD User Manual
Page 7

English
Español
Deutsch
Français
Italiano
Nederlands
PyÒÒÍËÈ
12
11
Connecting the Units
When connecting with a rear view camera
When using this product with a rear view camera, automatic switching to video from a
rear view camera when the gear shift is moved to REVERSE (R) position is possible.
WARNING:
• USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA.
OTHER USE MAY RESULT IN INJURY OR DAMAGE.
CAUTION:
• The screen image may appear reversed.
• The rear view camera function is to use this product as an aid to keep an eye on trailers,
or backing into a tight parking spot. Do not use this function for entertainment purpos-
es.
• The object in rear view may appear closer or more distant than in reality.
Fig. 6
Hilde-away unit (supplied)
15 cm
CAUTION
Fuse resistor
8 m
Extension lead (supplied)
Rear view camera
RCA cable
(sold separately)
To video output
Pioneer recommends the use of
a camera which outputs mirror
reversed images, otherwise
screen image may appear
reversed.
Violet/white
Of the two lead wires connected to the
back lamp, connect the one in which the
voltage changes when the gear shift is in
the REVERSE (R) position.
Connection method
1.Clamp the lead.
2.Clamp firmly with
needle-nosed pliers.
Note:
• It is necessary to set to AV INPUT2 in SETUP
when connecting the rear view camera.
See the section
S
“Connecting the power cord (2)
C
”.