beautypg.com

Connection to a plasma display, Connecting the speakers, English – Pioneer PDP-S37 User Manual

Page 5: Connecting your speaker cables (to the display)

background image

5

English

English

SYSTEM
CABLE

WHITE

BLACK

CONNECTION TO A PLASMA DISPLAY

CONNECTING THE SPEAKERS

1 Pass the speaker cables through the hole in the speaker mounting bracket.
2 Connect the speaker cables to the speaker.
3 Press the speaker cables into the groove of the bracket.
4 Connect the speaker cables to the display.

Connecting your Speaker Cables
(to the speaker)

Groove

Speaker Terminal

Speaker Cable

Connecting your Speaker Cables
(to the display)

Connect the cables correctly with respect to the
polarity of the Plasma Display and the speaker
terminals, that is,

ª cable to ª terminals and ·

cable to

· terminals. To do so, connect the cable

with the gray line to the

ª terminals and the white

cable to the

· terminals.

÷ Press the lever and insert the

end of the cable.

÷ When you release the lever,

it clamps onto the speaker
cable.

Gray Line

Push the lever, insert the end of the speaker cable
into the hole, and release the lever.

Pay attention to the polarity of the speaker terminals
when making connections. (The gray line represents
the

ª terminal)

White

Gray Line White White Gray Line

2

1

3

Warning

If you insert the speaker cable too far so that
the insulation is touching the speaker
terminal, you may not get any sound.

4

(black)

(red)

SRD1293A_01-07/En

6/16/05, 6:01 PM

5