Philips SVA106 - Manual (Page 26)

VCR/TV POWER EJECT
1 2 3
4 5 6
7 8 9
0 +100
CHANNEL
INDEX SLOW
SPEED
QUICK-
FIND TIME
EXIT COUNTER DISPLAY MENU
RESET MEMORY
REWIND / PLAY F.FWD
RECORD PAUSE/STILL / STOP
SEARCH
PROGRAM NUMBER 1
→ ONCE
DAILY
WEEKLY
26 Timer Recording
Follow the steps below to program your VCR to record TV pro-
grams while you’re away from home. You can program up to
seven timer recordings. For each one, the VCR will turn itself on,
record, and turn itself off automatically. Before you begin make
sure:
● Channels are set up.
● The clock is set.
● There is a tape in the VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program(s).
● The VCR is in VCR position. The VCR/TV light will appear. If it
does not, press the VCR/TV button once.
1
Press the MENU button until the TIMER PROGRAM-
MING menu appears. Program numbers that do not have a
timer recording stored will flash.
TIMER PROGRAMMING
PROG. 1 2 3 4 5 6 7
DATE
START TIME
END TIME
CHANNEL
REC SPEED
2
Press the PLAY button or the STOP button repeatedly to
select a program number. Then, press the F.FWD button.
(If you select a program number that already has a timer recording
stored, information about that program will appear. Press the
PLAY button or the STOP button to select another program num-
ber.)
3
Press the PLAY button or the STOP button repeatedly to
select a ONCE, DAILY, or WEEKLY recording. When the
arrow is beside your choice, press the F.FWD button.
● ONCE - The VCR will record a TV program on any day you
choose, up to 12 months away.
● DAILY - The VCR will record a TV program at the same time
on the same channel every day, Monday through Friday.
● WEEKLY - The VCR will record a TV program at the same time
on the same channel every week, for example, every Monday.
PROGRAM NUMBER 1
DATE
– – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
2-3
1