Lexmark 5056-xxx User Manual
Lexmark parts catalog, Lexmark

Lexmark™
C
920
50
5
6-
xx
x
Lexmark Parts Catalog
The following information is from Lexmark's Service Mnaual.
Lexmark and Lexmark with diamond design are
trademarks of Lexmark International, Inc., registered
in the United States and/or other countries.
The following paragraph does not apply to any country where such provisions are inconsistent with local law:
LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or
implied warranties in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the
programs described may be made at any time.
Comments may be addressed to Lexmark International, Inc., Department D22A/032-2, 740 West New Circle Road,
Lexington, Kentucky 40550, U.S.A or e-mail at [email protected]. Lexmark may use or distribute any
of the information you supply in any way it believes appropriate without incurring any obligation to you.
Lexmark, Lexmark with diamond design, and MarkNet are trademarks of Lexmark International, Inc., registered in the
United States and/or other countries.
ImageQuick, Optra Forms, and PrintCryption are trademarks of Lexmark International, Inc.
LEXFAX is a service mark of Lexmark International, Inc.
PostScript® is a registered trademark of Adobe Systems Incorporated.
PCL® is a registered trademark of the Hewlett-Packard Company.
Other trademarks are the property of their respective owners.
© 2006 Copyright Lexmark International, Inc.
All rights reserved.
UNITED STATES GOVERNMENT RIGHTS
This software and any accompanying documentation provided under this agreement are commercial computer software and
documentation developed exclusively at private expense.
Document Outline
- Lexmark Parts Catalog
- Parts catalog
- How to use this parts catalog
- Assembly 1: Covers 1
- Assembly 2: Covers 2
- Assembly 3: Covers 3
- Assembly 4: Covers 4
- Assembly 5: Covers 5
- Assembly 6: Upper unit
- Assembly 7: Paper feed
- Assembly 8: Base 2
- Assembly 9: Base 3
- Assembly 10: Electrical A
- Assembly 11: Electrical B
- Assembly 12: RIP board
- Assembly 13: Fuser unit
- Assembly 14: Cassette
- Assembly 15: Expansion feeder 1
- Assembly 16: Expansion feeder 2
- Assembly 17: Duplex unit 1
- Assembly 18: Duplex unit 2
- Assembly 19: High-capacity feeder 1
- Assembly 20: High-capacity feeder 2
- Assembly 21: High-capacity feeder 3
- Assembly 22: High-capacity feeder 4
- Assembly 23: High-capacity feeder 5
- Assembly 24: High-capacity feeder 6
- Assembly 25: Finisher covers
- Assembly 26: Finisher frame
- Assembly 27: Finisher feed 1
- Assembly 28: Finisher feed 2
- Assembly 29: Finisher elevator
- Assembly 30: Finisher electronics
- Assembly 31: Finisher docking 1
- Assembly 32: Finisher docking 2
- Assembly 33: Miscellaneous/options
- Assembly 34: Parts packets
- Assembly 35: Finisher parts packet P/N 402623