Linksys SPA942 - Manual (Page 5)

Transferring Calls
Starting a Conference Call
To initiate a three-way conference call:
Press the 1. Conf soft button during an active call. The first call goes on
hold and you hear a dial tone.
Dial the second phone number or extension to conference in.
2.
Press the 3. Conf soft button again. The call now includes you and the
other two parties.
Hanging up disconnects all parties in the conference call.
Using Setup Shortcuts
You can use the Setup button to perform many tasks, including:
Using your phone directory •
Speed dialing a number •
Forwarding calls •
Frequently Used Soft Buttons
<< or >> moves
the cursor left or
right
DelChr deletes
the previous
character
Edit changes an
entry
Clear erases an
entire entry
Ok or Save
confirms your
selections
Cancel cancels
changes (if
pressed before
Ok or Save)
Select chooses
an item to view
or change
Add/Delete
adds or deletes
an entry
You can transfer in calls in two ways:
Press the soft button under 1. Transfer/xfer during an active call. The
first call goes on hold and you will hear a dial tone.
Dial the second phone number or extension. That phone rings.
2.
To transfer the call without speaking to the second person 3. , press
Transfer/xfer again.
To speak to the second person, wait for that person to answer and
speak privately before pressing Transfer/xfer.
You are disconnected from the call.