Luce LCTV-2201A - Manual (Page 17)

Available Mode Ŋ Ŋ Ŋ Ŋ Yes / ŋ ŋ ŋ ŋ No
ŋ ŋ ŋ ŋ PC ŋ ŋ ŋ ŋ Video ŋ ŋ ŋ ŋ S-Video Ŋ Ŋ Ŋ Ŋ TV
TV Setup
Selected item
17
Channel system
3 Press Vol ŏ ŏ ŏ ŏ/ő ő ő ő of R/C or Ch ŏ ŏ ŏ ŏ/ő ő ő ő
of C/P and move the cursor to
Yes or No.
4
Press Yes for Auto Program for TV channels
To stop Auto Program , please press Exit key of R/C.
This will bring the previous channel until before you press
Exit key and only memories the programmed channels.
5
Press No to move to previous menu.
Ŋ Ŋ Ŋ Ŋ Please check the antenna cable has been connected.
Channel
Edit
2 Press Ch ŏ ŏ ŏ ŏ/ő ő ő ő of R/C or C/P and move the cursor to
Add or Erase .
1 Press Sel of R/C or Menu of C/P and select Channel Edit.
3 Select YES , the current channel will be erased.
4 select NO , move to previous menu.
2 Press CH. Search of the R/C
and select Auto Program .
OR
Notice:
Caution !
OR
1
Press Add/Erase of R/C , Channel Add and Channel Erase will be
constantly functioned.
US Air
US Cable
Japan Air
Japan Cable
1
Press Sel of the R/C or Menu of C/P to display below menu.
2 Press Ch ŏ ŏ ŏ ŏ/ő ő ő ő of R/C or C/P
to move cursor to required
channel system, then press
Sel of the R/C or Menu of
C/P for select.
AUTO PROGRAM
NO YES
Please select "YES" for Auto Program
Press the Vol ő ő ő ő of R/C
or press the Ch ő ő ő ő of C / P
Press the Vol ŏ ŏ ŏ ŏ of R/C
or press the Ch ŏ ŏ ŏ ŏ of C / P