Line 6 Studio 110 - Manual (Page 14)

Factory Reset of the Model
Defaults and a Special Hidden
Feature
You can reset all 4 of your LowDown’s programmable
models to their factory-programmed states by pressing
and holding down the Clean model button as you turn
on the power. Clean will flash to tell you the reset is
complete. Warning: This will erase ALL custom sounds
you might have created. Ask yourself, “Do I really
want to do this?” If your answer is yes, then go for it!
Also, there is a very popular sound that you may have
seen on the Studio 110’s big brothers. We have given
you a secret way to change the Clean model to be the
Brit model and put your Studio 110 into Rock Mode.
Press and hold the Clean and R&B model buttons as
your turn on the power. Clean and R&B will flash
back and forth to indicate that you have changed the
Clean model into the Brit model.
Brit
Based on* a ’68 Marshall
®
Super Bass. Enough said.
The Super Bass covers the kind of overdriven bass
sound brought to us by late ‘60’s British rock pioneers
such as Cream and The Who as well as ‘70’s giants Yes
and Rush.
If you would like to return the Clean model to the
Studio 110 just press and hold the Clean and R&B
model buttons as you turn on the power. Clean and
R&B will light solid to indicate that you have restored
the Clean model. As long as you don’t mind losing
your settings for Clean and Brit, you can change from
Normal Mode to Rock Mode anytime you want.
All product names are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These product names, descriptions
and images are provided for the sole purpose of identifying the specific products that were studied during Line 6’s sound model development. MARSHALL™
is a trademark of Marshall Amplification Plc.