Lenoxx Electronics CD-57 - Manual (Page 7)

IB-CD57-FD-E-063004
PROGRAMMED PLAY
During programming, the word PROG (program) flashes in the display. To
program songs to play in your preferred order, follow steps below:
1. Press the PROGRAM button.
Track number
3. Press the PROGRAM button to
confirm. The track 3 is now
programmed.
Program #2 will now show in the
display, r eady for your next
selection of track.
4. Repeat steps 2 and 3 to program
other tracks till you finish (up to
20 selections).
5. After programming is finished,
press PLAY to begin programmed
play. The word PROG shows in
the display and music begins.
6
The tracks (songs) on the disc can be programmed (arranged in advance)
to play in any order you prefer (up to 20 tracks can be programmed).
Program number
NOTE:
- The player will stop automatically
after all programmed tracks have
been played.
- To quit programmed play, press
STOP button once. Then you may
press PLAY button to re-start
normal play.
P R O G
P R O G
2.Press the SKIP/SEARCH button
( or ) to select track number
3 (example). the “PROG” and “ ”
will flash in the displa
y.
P R O G
Your programmed memory will
be lost:
• When the power is off, or the CD
Door is opened.
• When the alkaline batteries are
exhausted or removed, or the AC
ADAPTOR is disconnected.
The word “PROG ” and “ ” will
flash in the DISPLAY.
Programming Example
Program Number
Track Number (song number) 3
1 2
5
3
8
4
1
5
2
6
4 7
1
8
1
etc.
etc.
IB-CD57-FD-E-063004.P65 7/1/2004, 4:06 PM 7