LG LT1230HR - Manual (Page 18)

18 Room Air Conditioner
Disassembly Instructions
4. ORIFICE, HEATER ASSY AND TURBO FAN
1. Remove the front grille. (Refer to section 1)
2. Remove the cabinet. (Refer to section 2)
3. Remove the 2 screws which fasten the evaporator
at the left side and the right side.
(See Fig. 27)
4. Move the evaporator sideward carefully.
5. Remove the 2 terminals carefully
(See Fig. 28, at Electric Heater Model only)
6. Remove the 4 screws which fasten the orifice. (See
Fig. 28)
7. Remove the orifice. (See Fig. 28)
8. Remove the clamp which secures the turbo fan with
plier. (See Fig. 29)
9. Remove the turbo fan with plier or your hand with-
out touching blades. (See Fig. 30)
10. Re-install the components by referring to the
removal procedure, above.
5. FAN
1. Remove the cabinet. (Refer to section 2)
2. Remove the brace and shroud cover.
(Refer to section 4)
3. Remove the 6 screws which fasten the condenser.
4. Move the condenser sideways carefully.
5. Remove the clamp which secures the fan.
6. Remove the fan. (See Fig. 31)
7. Re-install the components by referring to the removal
procedure, above.
Air Handling Parts
MODE TIMER
POW ER
FAN SPE ED
Fan Ener gy Save r
Coo l
Tim er TEM P
'F F1 L OW F2 M ED F3 H IGH
FIG. 27
FIG. 28
FIG. 29
FIG. 30
FIG. 31