Lindy No. 39123 - Manual (Page 8)

English Manual
Reset LINDY Console Switch (switch 3)
Use this option to reset the LINDY Console Switch. Change the switch to the ON position
momentarily and then OFF again to achieve the reset.
OFF Normal operation.
ON Reset LINDY Console Switch (change back to OFF position to complete the reset).
Enter configuration mode (switch 6)
Allows you to alter key aspects of LINDY Console Switch operation. Within configuration mode
you can use any connected keyboard to enter specific key combinations. See Using
configuration options for a full list of key combinations.
OFF Normal
operation.
ON Enter configuration mode (change back to OFF once configuration options have been
entered).
Enter upgrade mode at power on (switch 7)
Places the LINDY Console Switch into a special state whereby you can rewrite its internal
operating software. After placing this switch into its ON position, you need to cycle the power
input or briefly use switch 3 to reset the LINDY Console Switch. See LINDY Console Switch
software upgrade for full details about the upgrade procedure.
OFF Normal
operation.
ON Enter upgrade mode following the next reset or power on.