Lightolier A1202 - Manual (Page 2)

READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING LUMINAIRE
This luminaire is intended for installation in accordance with the National Electrical Code and local regulations.
To assure full compliance with local codes and regulations, check with your local electrical inspector before
installation. To prevent electric shock, turn off electricity at fuse box before proceeding.
Retain these instructions for maintenance reference.
IS:22UEM
INSTRUCTION SHEET NO.
C0312 Page 2 of 2
INSTRUCTION FOR INSTALLATION OF PRE-WIRED COMPACT FLUORESCENT
EMERGENCY LIGHTING DECORATIVE LUMINAIRES
INDICATOR
LIGHT
TEST
SWITCH
GREEN
TO LUMINAIRE AND
SUPPLY GROUND
HOT
(SWITCHED
OR
UNSWITCHED)
GRD
HOT
(UNSWITCHED
BLACK
EMERGENCY
BALLAST
AC
BALLAST
INVERTER
CONNECTOR
SKT
(COM) WHITE WHITE
BLUE
BLUE
YELLOW
YELLOW/RED
YELLOW/RED
(COM) WHITE
WIRING DIAGRAM
OPERATION
When AC power is applied, the charge indicator light is illuminated indicating that the battery is being
charged . When the power fails, the emergency lighting ballast automatically switches to emergency
operation, keeping lamp illuminated at reduced output for 90 minutes.
MAINTENANCE
Although no routine maintenance is required to keep the emergency ballast functional, it should be
checked periodically to ensure that it is working. The following is recommended:
1. Visually inspect the charging indicator light monthly. It should be illuminated.
2. Test the emergency operation of the luminaire once every three months. Lamp should operate at
reduced output.
3. Conduct a 90 minute discharge test at least once a year or more if required by local ordinance. Lamp
should operate at reduced output for 90 minutes.
BLUE/RED
BLUE/RED
YELLOW
WHITE/BLACK
WHITE/RED
®
631 Airport Road, Fall River, MA 02720 · (508) 679-8131 · Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2010 Philips Group
120/277V 120/277V
BLACK
BL
BL
RD
RD