LG K7F-PIDA - Manual (Page 25)

Chapter 4. BUFFER MEMORY CONFIGURATION AND FUNCTIONS
4- 6
4.2.7 Outputting Manipulated Value (K7F-PIDA : Addresses 202 to 233, K4F-PIDA : Addresses 53 to 60)
1) This area stores the MV of each loop.
2) The MV output range is 0 to 16000.
4.2.8 Setting Error Information (K7F-PIDA : Addresses 234 to 265, K4F-PIDA : Addresses 61 to 68)
1) When setting the control data for each loop, if any setting exceeds its range the error
information is indicated on this area.
2) Bit 0 to 5 are used to indicate error information for each loop. The following shows the error information
indicated by each bit when it turns On(1).