Largan EASY 200 - Manual (Page 16)

10
2. Using the USB cable
2-1. Attach the USB cable to the
USB terminal on the charger.
Plug the other end of the USB
cable into the USB port on the PC.
2-2. To turn the computer on. While
the battery is being charged, the
chargers display LED will be red;
when the battery is fully charged,
the light will turn green.
NOTE
1. Charger:
Input Voltage: USB 5V
2. Battery:
Voltage: 3.7V
Nominal capacity: 700mAh
Dimensions: 33.1 (W) x 53 (H) x 7.3 (D) mm
Incorrect usage of charger/battery
could cause damage to the camera or yourself,
other people or equipment. The camera's manufacturer and
it's distributors are not liable for any consequential damages
arising from inappropriate devices and/or use of such devices.