Linksys BUSINESS SERIES SRW224G4 - Manual (Page 39)

Chapter 5 Advanced Configuration
32 WebView Switches
Counter Value Displays the current counter value for the
particular alarm.
Statistics > RMON Events
The RMON Events screen contains fields for defining RMON
events.
Statistics > RMON Events
Add Event
Event Entry Displays the event.
Community Displays the community to which the event
belongs.
Description Displays the user-defined event description.
Type Describes the event type. Possible values are:
None • Indicates that no event occurred.
Log • Indicates that the event is a log entry.
Trap • Indicates that the event is a trap.
Log and Trap • Indicates that the event is both a log
entry and a trap.
Owner Displays the device or user that defined the
event.
Use the Add to List button to add the configured RMON
event to the Event Table at the bottom of the screen.
The Event Table area contains the following additional
field:
Time Displays the time that the event occurred.
RMON Events Log
RMON Events > Events Log
Event Displays the RMON events log entry number.
Log No Displays the log number.
Log Time Displays the time the log entry was entered.
Description Displays the log entry description.
Statistics > Port Utilization
The Port Utilization screen displays the amount of resources
each interface is currently consuming. Ports in green are
functioning normally, while ports in red are currently
transmitting an excessive amount of network traffic.
Statistics > Port Utilization
Refresh Rate Indicates the amount of time that passes
before the port utilization statistics are refreshed. The
possible field values are:
No Refresh • Statistics are not refreshed.
15 Sec • Statistics are refreshed every 15 seconds.
30 Sec • Statistics are refreshed every 30 seconds.
60 Sec • Statistics are refreshed every 60 seconds.