Lindy 39405 - Manual (Page 54)

5.5.6 Date And Time
Here you can set the internal real-time clock of the IP ACCESS SWITCH LITE. You can adjust
the clock manually or use an NTP timeserver. Without a timeserver your time setting will be lost
if the IP ACCESS SWITCH LITE is powered down for more than a few minutes. To avoid this,
you can use an NTP timeserver which sets up the internal clock automatically to the current
UTC time. Because the NTP server time is always UTC, there is a setting that allows you to set
p a static offset to get your local time. u
Note: The IP ACCESS SWITCH LITE does not adjust to daylight saving time automatically.
So you have to set up the UTC offset according to the local conventions of your country.
50