LG 785 - Manual (Page 38)

Getting Started
4-2 WorkCentre Pro 665/685/765/785
2. Use the Numeric Keypad to select the desired language, then
press
Enter.
The menu selection screen redisplays. Press Stop to return to the
Standby Mode.
Setting the Date and Time
The WorkCentre shows the date and time in the display when in the
Standby Mode. The date and time information is used by the internal
clock to start delayed jobs and record data on faxes and reports. In
addition, you can program the WorkCentre to print the date and time
on documents that you send and receive.
For more information on printing the date and time on your
documents see “Setting the Send Header” and “Setting the Receive
Footer” later in this chapter.
To set the Date & Time:
1. Press:
2. Select the Time format:
To select 24 hour format, press .
To select 12 hour format, press .
*** Please refer to your Menu Map.
1. XXXXX
2. XXXXX
3. XXXXX
4. XXXXX
Menu ***
Time format
1. 24 hour
2. 12 hour