Lincoln Electric K1309-21 - Manual (Page 2)

For maximum welding flexibility select the DH-10 dual
feeder. Weld with two different types and sizes of wire
with two different welding procedures
(3) !
Description Order Number
DC-400 power source K1308-11
DH-10 wire feeder K1499-3
.045 Drive Roll – solid wire KP1505-045S
.035 Drive Roll – solid wire KP1505-035S
Magnum 400 Gun Package K471-21 (1) (2)
Weld Power Cable – 10 ft. K1842-10
GC-500 Work Clamp K910-2
Undercarriage (twin cylinder) K841
Gas Regulator and Hose Kit K586-1
Where premium welding performance is demanded – this
system delivers!
Description Order Number
DC-400 power source K1308-11
LN-10 (four roll) wire feeder K1559-3
.045 Drive Roll – solid wire KP1505-045S
Swivel Platform K1557-1
Magnum 400 Gun Package K471-21 (1)
Weld Power Cable – 10 ft. (2 req’d.) K1842-10
GC-500 Work Clamp K910-2
Undercarriage (twin cylinder) K841
Gas Regulator and Hose Kit K586-1
Best for applications where more process control is required
for arc starting, welding and crater control!
Description Order Number
DC-400 power source K1308-11
LN-742 (Two Roll) wire feeder K617-1
Feeder Control Cable – 10 ft K1819-10
.045 Drive Roll – solid wire KP653-052S
Universal Stand K1524-1
Swivel Platform K1557-1
Magnum 400 Gun & Cable asbly K471-2
Gun Connector Kit K466-1
Weld Power Cable – 10 ft. (2 req’d.) K1842-10
GC-500 Work Clamp K910-2
Undercarriage (twin cylinder) K841
Gas Regulator and Hose Kit K586-1
Our most popular MIG and flux-cored welding system!
Description Order Number
DC-400 power source K1308-11
LN-7 GMA (Two Roll) wire feeder K440-2
Feeder Control Cable – 10 ft. K1818-10
.045 Drive Roll – solid wire KP653-052S
Universal Stand K1524-1
Swivel Platform K1557-1
Magnum ® 400 Gun & Cable asbly K471-2
Gun Connector Kit K466-1
Weld Power Cable – 10 ft. (2 req’d.) K1842-10
GC-500 Work Clamp K910-2
Undercarriage (twin cylinder) K841
Gas Regulator and Hose Kit K586-1
[2]
www.lincolnelectric.com
• Fan cooled for long life expectancy. Electronic and
thermostatic protection safeguard DC-400 from
current overload and excessive temperatures.
• Windings and rectifiers protected against moisture
and corrosive environments.
• Both 14 pin MS-style cable connection and terminal
strip access for remote control and wire feeder
connections and output studs for weld cables.
• Circuit breaker protected on-board power for a
wire feeder: 115V available from the terminal strip,
42V and 115V available from the 14-pin connector
receptacle.
• K1309 models have Continental European receptacle
that provides 220V, 2-amp AC auxiliary power for
operating water cooler.
• 115V AC power on/off switch with pilot light provides
added user safety.
• Durable powder paint system protects both sides of
all painted surfaces to prolong machine’s life.
• K1308 models are UL and CSA approved.
• Three year warranty on parts and labor.
• Manufactured under a quality system certified to
ISO 9001 requirements.
Advantage Lincoln
System Selection
DC-400/LN-7 GMA – .045 MIG Welding System
DC-400/LN-742 – .045 MIG Welding System DC-400/DH-10 – .035 & .045 MIG Welding System
DC-400/LN-10 – .045 MIG Welding System
Typical MIG welding systems.
(1) Fully assembled, no gun connector required.
(2) Two required.
(3) Both electrodes must have the same polarity.
Note: Above systems do not include shielding gas. Sold separately.