Life Fitness HDCR - Manual (Page 10)

10
STEP 2:
‰ LOOSELY assemble the two CROSS SUPPORTS (8) and two PULL-UP SUPPORTS (9) to the top of the FRONT
RIGHT & LEFT UPRIGHTS (1 & 2) using eight 1/2 X 4-1/2” BOLTS (4), sixteen 1/2” INT TOOTH LOCK WASHERS
(6) and eight 1/2” LOCK NUTS (7).
‰ Assemble the LOWER CROSS BRACE (10) to the inside of the two BASES (3) using four 1/2 X 4-1/2” BOLTS (4),
four BACKING DOME WASHERS (5), four 1/2” INT TOOTH LOCK WASHERS (6) and four 1/2” LOCK NUTS (7).
NOTE: An Upper Band Peg accessory is available for the HDCR8. Assemble the UPPER BAND PEG ACCESSORY (A)
to the FRONT LEFT UPRIGHT (2) at the same time as the PULL-UP SUPPORTS (9). Use the same hardware
with the exception of replacing the 1/2 X 4-1/2” BOLTS (4) with the provided 1/2 X 5” BOLTS (B).
6
4
6
7
8
9
5
3
10
6
4
7
5
4
7
6
9
8
2
2
1
1
B
6
A
2
6
7
9