Lenoxx Electronics CD-1492 - Manual (Page 16)

RECORD LEVER INTERLOCK
PROTECTING CASSETTE TAPE AGAINST ERASURE
All cassette tapes are provided with tabs which, when in place, allow tape erasure
to be performed. If the tabs are removed then the tape CANNOT be erased or recorded
on and the CASSETTE RECORD button cannot be pressed.
To protect the A (or 1) side for cassette tape, break off the A side tab with a
screwdriver.
Follow same procedure for B (or 2) side.
NOTE: Music tapes you buy from a store have these tabs removed to prevent
accidental erasure.
The tape can be re-recorded or erased, if required, by covering the tab holes
with plastic tape.
NOTE: If the RECORD button will not go down, the tabs above are
probably missing - Also check if the tape has reached the end.
15
SCREWDRIVER
Break the small tab to
prevent erasing or
recording
PLASTIC TAPE
IB-CD1492(AD)-WM-E-031402
IB-CD1492(AD)-W-E-031402.p65 3/19/02, 2:17 PM 16