LevelOne WBR-3404TX User Manual

Page 62

4.7.5 Routing Table

Routing Tables allow you to determine which physical interface address to use for outgoing IP data

grams. If you have more than one routers and subnets, you will need to enable routing table to allow

packets to find proper routing path and allow different subnets to communicate with each other.

Routing Table settings are settings used to setup the functions of static and dynamic routing.

RIP Enable: Check to enable RIP function.

Static Routing: For static routing, you can specify up to 8 routing rules. You can

enter the destination IP address, subnet mask, gateway, hop for each routing rule, and

then enable or disable the rule by checking or unchecking the Enable checkbox.

Example: