Door replacement feed water tube installation, Installation – LG LRSC26925SW User Manual
Page 9
Door replacement
Feed water tube installation
Push the refrigerator sideways through the
entrance door as shown in the right picture.
Automatic icemaker operation needs water pressure of 21.3~121psi(lb/inch
2
) (That
is, a 7oz. paper cup will be filled within 3 sec.).
If water pressure does not reach the rated 21.3psi(lb/inch
2
) or below, it is necessary
to purchase a separate pressure pump for normal automatic icemaking and cool
water feed.
Keep the total length of the water feed tube within 40 feet and be careful not to
bend or kink the tube. If the tube is longer than 40 feet, the icemaker and water
dispenser will not operate properly.
Install the water feed tube at a place free from heat.
Connect to potable water supply only.
Refer to instructions with water filter kit for installation.
Mount the doors in the reverse order of removal after the refrigerator is brought to
the installation area.
Move the
Refrigerator
Before
Installation
Warning
1
2
3
4
5
Max
FRZ
TEM
P
REF
TEM
P
Min
5
4
3
2
1
Max
Installation
9