Using your refrigerator – LG LFC23760 User Manual

Page 19

OPTIBIN CRISPERS

The OptiBin Crispers provide fresher-tasting fruit and
vegetables by letting you easily control humidity inside the
crisper. The OptiBin Crispers include: 1) a humidity
control knob at the front of the crisper cover and 2) a
large lattice on the inner surface of the cover to hold

or release moisture.

To remove the glass:
1. Lift up the glass after inserting a screwdriver under the

crisper cover.

To remove the crisper:

1. Slide crisper straight out to the stop.
2. Lift the front of the crisper, then pull it out to remove.
3. Replace the crisper

by sliding it back in fully past the

drawer stop.

2. Pull up and out.

USING YOUR REFRIGERATOR

CRISPER COVER WITH LATTICE ON INNER
SURFACE (on some models)

To remove the crisper cover:

1. Remove both crisper drawers.
2. While holding the crisper cover support (2), pull the

cover up and out(1).

WARNING: Be careful when handing glass cover since
glass is not attached to cover.

To remove the lattice on inner surface:

1. Remove crisper cover(as illustrated above).
2. Hold the glass cover and overtum crisper cover.
3. For each lattice hold lattice and pull sides of the cover

outward to remove lattice.

To replace lattice on inner surface:

1. For each lattice insert middle tab in 1 (closed to glass

cover) and pull sides of the cover to insert lattice.