Cd trouble shooting guide, Problem – Lenoxx Electronics CD-149 User Manual

Page 19

CD TROUBLE SHOOTING GUIDE

PROBLEM

POSSIBLE CAUSE AND REMEDY

CD does not rotate

Is AC Power Cord plugged into outlet? Does outlet

have power? Check outlet with a lamp or other

appliance.

Make sure the Function Switch is in CD position.

If using the set on batteries - make sure you

unplug the AC Cord from the back of the set and

outlet.

- Also check if batteries are fresh.

(The AC Socket in the back of the set has a switch

which shuts off battery power if cord is plugged

into the back of the set).

CD does not play

If the Display shows

. This means the CD disc

is upside down. Open the door, remove the CD, flip it

over and insert correctly. The printed side up.

1. Is the lens very dirty? (Gently clean lens with a

soft cloth or CD cleaner disc available at most

Hi-Fi stores.)

2. Is Power/Batt. Indicator Lamp ON?

3. Is the Function Switch in CD position?

4. Is the track number flashing? (press Play) The

track number will flash in pause and be steady

on during play.

Disc skips parts of

songs

Disc has a defect. Try cleaning the disc with a

clean rag or disc cleaner. If this does not help,

the disc may be damaged.

Is the lens very dirty? Gently clean the lens.

Speakers have no

sound

1. Are the speakers plugged in? Check the back of

the set and see page 5.

2. Is Volume Control at MIN? Adjust the Volume Control.

3. Is headphone in jack? Remove headphones to

power speakers.

4. Make sure AC Cord is plugged in or unplugged

from back of set if using batteries.

5. Make sure batteries are fresh.

N O T E :

N O T E : The CD player and the cassette decks are fitted with self-lubricating

bearings which must not be oiled or greased.

TTTTTO CLEAN THE CD PLA

O CLEAN THE CD PLA

O CLEAN THE CD PLAYER

YER

A chamois soft cloth very slightly moistened with water is sufficient for cleaning the

housing of the set and the enclosures.

N O T E :

N O T E : Your CD player may not play when bringing it from a cold place (outdoors)

to a warm place (indoors). Because of large temperature differences,

condensation may have formed on the lens of the laser. This will disappear

after some time (when the mechanism warms up).

CD-149S042599 V.2 E