Continued, Lr-400 setup instructions – Listen Technologies LR-300 User Manual

Page 35

Text mode
Original mode

LR-400 Setup Instructions

continued

Turn the Unit On

Receivers are turned on by rotating the volume dial counterclockwise. The red LED on top of
the unit should activate and the LCD display should illuminate. If they do not, make sure you
have installed the batteries correctly and that you are using fully charged batteries.

Select Channel(s)

See page 56 for complete channel selection
information.

Set Squelch

See pages 36 and 37 for squelch and
programming information.

Red LED will illuminate
when on

Turn volume knob
counterclockwise
to turn on

LCD display will
activate when on

Earphone/Headset jack