Linksys BEFSR81 - Manual (Page 21)

15 Chapter 6: Configuring the Router
Instructions
EtherFast Cable/DSL Router with 8-Port Switch
PPPoE
If your ISP says that you are connecting through a PPPoE or you normally enter a user name and password to
access the Internet, perform these steps:
A Select PPPoE as the Internet Connection Type, as shown in Figure 6-5.
B Enter the User Name and Password.
C Click the Save Settings button to save this change, or click the Cancel Changes button to undo your
change. For further help on this tab, click the Help button.
D Click the Status tab, and then click the Connect button. When you are finished, proceed to step 4.
RAS
RAS (shown in Figure 6-6) is a service used in Singapore only. If you are using a RAS connection, check with your
ISP for the necessary setup information.
A When finished making your changes on this tab, click the Save Settings button to save this change, or
click the Cancel Changes button to undo your change. For further help on this tab, click the Help button.
B Click the Status tab, and then click the Connect button. When you are finished, proceed to step 4.
Figure 6-5: PPPoE for Basic Setup
Figure 6-6: RAS (for SingTel) for Basic Setup