Digit – Lenoxx Electronics CD-78 User Manual

Page 9

DIGIT

DIGITAL

AL ANTI-SKIP

ANTI-SKIP

ANTI-SKIP MEMOR

MEMOR

MEMORY

Y FUNCTION

FUNCTION

The digital anti-skip function uses semiconductor memory to

prevent the sound from skipping or stopping when the set is

shaken, shocked or vibrated during play.

When the set is subjected to shock during play, the data stored

in memory continues to be decoded and played. This gives the

pickup time to stabilize and continue reading new music. As

the data is read from memory, the indicator changes from

to .

If the set is subjected to repeated shocks and all the data

stored in memory is used up, the mark is displayed and

the sound will skip or stop for a brief period until the memory

basket fills up again.

Press the Anti-Skip Button again to turn the digital anti-skip

function off.

The mark changes to the mark, indicating that the data

buffer is full.

Once the pickup returns to its original position, new data is

stored in memory and the display changes back to the

mark.

Keep the digital anti-skip function off when using the set in a

stable - no vibration area, where it will not receive shocks. The

batteries will last longer when the anti-skip function is turned

off.

NOTE:

When the digital anti-skip function is switched on or off, the sound

will be interrupted for 1 or 2 seconds . This is normal (the blank

time is used to fill the memory).

A N T I-SKIP

X 1

DISPLAY WITH EMPTY MEMORY

DISPLAY WITH FULL MEMORY

SOME MEMORY USED WHEN

SET IS SHOCKED

ALL MEMORY USED

ANTI-SKIP MEMORY FULL

ANTI-SKIP MEMORY EMPTY

PRESS ANTI-SKIP BUTTON TO TURN ANTI-SKIP ON

PRESS IT AGAIN TO TURN ANTI-SKIP OFF

When the Anti-Skip Button is pressed during play, music will stop

for a few seconds, and the indicator appears in the display

and the digital anti-skip function turns on. The digital data

equivalent to approximately 10 seconds of music is stored in

read-ahead memory buffer before it is decoded and played.

CD-78(72RD)070299 NL v.1 E