Lenoxx Electronics CD-566 - Manual (Page 7)

IB-CD566(CDX35A-0A3)-WM-E-011905
PROGRAMMED PLAY
During programming, the symbol PROG (program) flashes in the display. To program
songs to play in your preferred order, follow steps below:
1.Press the PROGRAM button.
Track number
3.Press the PROGRAM button to confirm.
The track 3 is now programmed.
Program #2 will now show in the display,
ready for your next selection of track.
4. Repeat steps 2 and 3 to program other
tracks till you finish (up to 20 selections).
5. After programming is finished, press the
PLAY button to begin programmed play.
The symbol PROG shows in the display
and music begins.
6
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Program number
NOTE:
- The player will stop automatically after
all pr ogrammed tr acks hav e been
played.
- To quit programmed play, press STOP
button once. Then you may press PLAY/
PAUSE button to restart normal play.
PRO G
PROG.
PR OG
PLAY/PAUSE
PROG.
2.Press the SKIP button ( or ) to
select track number 3 (example). The
symbol “PROG” and “
” will flash in the
displa y.
PROG
Your programmed memory will be
lost:
• When the power is off, or the CD Door
is opened.
• When the alkaline batteries are
exhausted or removed, or the AC
ADAPTOR is disconnected.
The symbol “PROG ” and “ ” will flash
in the display.
Programming Example
Program Number
Track Number
(song number) 3
1 2
5
3
8 4
1 5
2 6
4
7
1 8
1
etc.
etc.
SKIP
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pmd 1/19/2005, 8:45 PM 7