Loewe A 37 EN - Manual (Page 41)

41
Problem
Digital Link Plus does not function.
Various characters are displayed incorrectly in
the teletext.
No sound via external digital audio amplifier
Possible cause
a) Euro-AV cable is not fully wired (pin 10 not
wired).
b) Some recorders can only adopt stations during
the initial installation of the TV set.
c) All or some of the terrestrial and cable stations
are stored on station storage locations ≥ 99.
The wrong character set is set in the teletext
menu.
a) The external digital audio amplifier does not
support the selected sound format (Dolby
Digital, dts, MPEG).
b) TV set and external digital audio amplifier are
not connected.
Help
a) Replace the Euro-AV cable.
b) Restore the recorder to the as-delivered state
(see recorder‘s operating instructions).
c) Rearrange the terrestrial and cable
programmes so that they fall between 1 and
99.
Set the right character set: Teletext menu -
Settings - Character set: standard or the
appropriate character set.
a) Set PCM stereo on the DVD player in the
sound selection. For DVB stations, switch
language/sound selection (green colour key)
to Stereo on the TV set in the status display
(END).
b) Connect Digital-Out from the TV set to a Digital-
In of the external digital audio amplifier and
select the appropriate input to this.
What to do, if ...