Adjusting your monitor image, Using the direct access controls, Using the on-screen display (osd) controls – Lenovo L1900P User Manual
Page 14: Adjusting, Your, Monitor, Image, Using, Direct, Access
Adjusting
your
monitor
image
This
section
describes
the
user
control
features
used
to
adjust
your
monitor
image.
Using
the
direct
access
controls
The
direct
access
controls
can
be
used
when
the
On
Screen
Display
(OSD)
is
not
displayed.
Note:
Table
2-1.
Direct
access
controls
Using
the
On-Screen
Display
(OSD)
controls
The
settings
adjustable
with
the
user
controls
are
viewed
through
the
On-Screen
Display
(OSD),
as
shown
below.
To
use
the
controls:
1.
Press
to
open
the
main
OSD
menu.
2.
Use
or
to
move
among
the
icons.
Select
an
icon
and
press
to
access
that
function.
If
there
is
a
sub-menu,
you
can
move
between
options
using
or
,
then
press
to
select
that
function.
Use
or
to
make
adjustments.
Press
to
save.
3.
Press
to
move
backwards
through
the
sub-menus
and
exit
from
the
OSD.
4.
Press
and
hold
for
10
seconds
to
lock
the
OSD.
This
will
prevent
accidental
adjustments
to
the
OSD.
Press
and
hold
for
10
seconds
to
unlock
the
OSD
and
allow
adjustments
to
the
OSD.
Chapter
2.
Adjusting
and
using
your
monitor
2-3
The direct access controls are orange.
5. Enables DDC/CI by default. Use OSD Exit Key,Press and hold the buttons
for 10 seconds to disable / enable DDC/CI function. The words " DDC/CI disable"
shows on the screen.
Icon
Control
Description
Input Change
Switches the video input source.
Image Setup
Activates automatic image adjustment.
Brightness
Direct access to Brightness adjustment.