Lowrance electronic LVR-880 EU - Manual (Page 15)

Push ENTER (the center of the Channel Select knob) to show the DSC SETUP menu. 4.
The cursor is at USER MMSI. Push ENTER. 5.
A dashed line appears. Enter your MMSI along the dashed line, one number at a time, as
follows:
Press + or – on the microphone OR turn the Channel Select knob on the base station to
select the first number of your user MMSI. Push ENTER to confirm each correct entry and
to move to the next position.
If you make an error, press – on the microphone until the < character appears, then
push ENTER to backup and correct the number.
When you have entered the last number, push ENTER. 6.
Enter your user MMSI again as a password check, then push ENTER to permanently store 7.
your user MMSI and return to the menu.
You can view your stored user MMSI at anytime by selecting USER MMSI in the main 8.
menu.
Now enter your ATIS MMSI if you will be operating on European inland waterways. If you will
not be operating on European inland waterways, specify your FM region.
Enter your ATIS MMSI (LVR-880EU only)
If you are navigating inland waterways within Europe, you must enter your ATIS MMSI to ac-
cess ATIS functionality.
An ATIS MMSI always starts with 9.
ATIS sends a digital message whenever you release the PTT button. Inland waterways rules
require 1 W Tx power on Channels 06, 08, 10, 11, 12, 13, 14, 15, 17, 71, 72, 74, and 77.
IMPORTANT: This is a ONCE-ONLY operation. You can view your ATIS MMSI at any time, but
you get only ONE opportunity to enter it.
DSC SELECT
USER MMSI
GROUP MMSI
ATIS MMSI
INPUT ATIS
MMSI
USER MMSI
987654321
STORE
CANCEL
ATIS MMSI
INPUT AGAIN
ATIS MMSI
987654321
STORE
CANCEL
DSC SETUP
USER MMSI
GROUP MMSI
ATIS MMSI
VIEW ATIS
MMSI
987654321
Press + or – on the microphone OR turn the Channel Select knob to move the cursor to 1.
move the cursor to ATIS MMSI and push ENTER.
Lowrance - LVR-880 Installation Instructions 15