Listen Technologies LA-161 - Manual (Page 46)

40
LT-800
LR-200-072
LR-200-072 Setup Instructions
Insert two AA batteries making note of the battery
polarity shown in the battery compartment, and again
verifying that the BATTERY SELECT switch is in the correct
position for the batteries you are using. (Alkaline should
be selected for all battery types other than NiMH).
Place Batteries in Unit
NOTE: Listen provides industrial strength AA alkaline
batteries (LA-361) and high performance AA
Nickel Metal Hydride batteries (LA-362). These
may be purchased from your Listen dealer.
Your headset or earphone will connect to the jack on the top of the unit.
Either mono or stereo connectors may be used with a Listen receiver. Make
certain you push the plug all the way into the jack.
Connect an Earphone or Headset
+
+
-
-
+
+
-
-
72
Alkaline
Battery Selec t
Chann el Select
NiMH
5
6
72
STAND ARD RECEI
VER
Set channel select switch to desired channel (A, E, H). Make
sure that the channel on both receiver and transmitter are the
same.
Channel Select
4
Channel Select Switch