Logitech Ultimate Ears 200 - Manual (Page 2)

Gently insert earphone into your ear for a
good seal: R for right ear; L for left. Never
remove an earphone from your ear by
pulling on its cable.
Store by wrapping cable around fingers;
place earphones inside protective
pouch. To clean, remove cushion and
wipe with a clean cloth.
Troubleshooting
• No sound – ensure that the 3.5 mm earphone connector is fully seated into
the iPod/MP3 player headphone jack.
• Weak bass – check ear cushion seal; try another ear cushion size.
• Detached ear cushions – firmly attach ear cushions to earphone nozzle. See
step 2 on reverse side.
• Diminished sound quality – remove ear cushions, check for blockage in
nozzle, and wipe with a clean cloth.
• Missing ear cushions – go to www.logitech.com for replacements.
Product information:
www.logitech.com
Support: www.logitech.com/support (see phone numbers in this document)
Product registration:
www.logitech.com/register
Protect your hearing: Read safety guidelines in Important Information Document.
4 5
Insert the earphone cable connector into the
3.5 mm headphone jack on your iPod® or
MP3 player.
3
Nozzle
Rib
Choose an ear cushion size, extra, extra small (XXS)
to large (L), which best fits your ears. Selecting the
correct ear cushion size helps ensure a comfortable fit
and seal to achieve optimal sound quality.
Attach ear cushions to earphone nozzle. Push ear
cushion past rib on nozzle so ear cushion will not
separate from nozzle during use.
1
2
L M S XS XXS