Lowrance electronic M56 - Manual (Page 111)

105
In Fig. 3 the traveler has turned northeast on his new course and is
heading straight for Wpt 2, which is 0.28 miles away. Fig. 4 shows route
navigation on the Map Page. In this figure, the traveler has reached Wpt
2 and is starting on the leg between Wpts 2 and 3.
Navigate a Route in Reverse
Here's how you run a route backward, from the end waypoint to the
beginning waypoint:
1. From the N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
,
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
2. Press
↓ to select route name|
ENT |
→ to
R EVERSE R OUTE
| ENT |
← to
N
AVIGATE
R
OUTE
| ENT .
3. Upon arrival at your destination, cancel navigation:
press
MENU | MENU |
↓ to
C ANCEL N AVIGATION
| ENT | ←
to Y ES
| ENT .
Trails
Delete a Trail
This is the command used to erase or delete a trail:
Press
MENU | MENU |
↓ to
M
Y
T
RAILS
| ENT |
↓ to trail name|
ENT|
↓ to D
ELETE
T RAIL
| ENT |
← to
Y ES
| ENT .
Tip:
You can also delete all trails at once:
1. Press
MENU | MENU |
↓ to
M Y T RAILS
| ENT .
2. Press
→
to D
ELETE
A
LL
| ENT |
← to
Y
ES
| ENT .
Edit a Trail Name
To edit a trail name: press
MENU | MENU |
↓ to
M
Y
T
RAILS
| ENT |
↓ to trail
name| ENT|ENT . Press
↑ or ↓ to change the first character, then press →
Figure 4. Figure 3.