La Crosse Technology WS-9043U - Manual (Page 10)

10
date of occurrence are displayed. The maximum record will display for 30 seconds before returning to the
normal display mode.
8. Press and release the OUT/MIN button again (once while “MAX” dew point is still displayed, 8 times
otherwise). “MIN” appears with the dew point, indicating that the minimum dew point and the time and
date of occurrence are displayed. The minimum record will display for 30 seconds before returning to the
normal display mode.
9. While “MIN” is still displayed, press and release the OUT/MIN button again to return to the current data
display. While in the record display mode, pressing any key except SET key will also return the display
back to the current readings.
C. RESETTING THE MIMIMUM AND MAXIMUM RECORDS
To reset the INDOOR records:
1. Press and release the IN/HR button to select the record you wish to reset, either MAX or MIN.
2. Press and hold the SET button for 5 seconds.
3. The record is now reset and will show the current time in the TIME LCD and current indoor temperature or
humidity in the INDOOR LCD.
To reset the OUTDOOR records:
1. Press and release the OUT/MIN button to select the record you wish to reset, either MAX or MIN
2. Press and hold the SET button for 5 seconds.
3. The record is now reset and will show the current time in the TIME LCD and current outdoor temperature,
humidity, heat index or dew point in the OUTDOOR LCD.
V. MOON PHASE
There are 12 moon phases shown on the indoor weather station. Thus, when the moon icon is all white, it is a full moon.
New Moon Full Moon
Small Waxing Crescent Large Waning Gibbous
Large Waxing Crescent
Small Waning Gibbous
First Quarter Last Quarter
Small Waxing Gibbous Large Waning Crescent
Large Waxing Gibbous Small Waning Crescent
VI.
TIME ALARM
To set the time alarm:
1. Press and hold the ALM/+ button for 3 seconds.
2. The alarm time will begin to flash in the DATE LCD.
3. Press and release the IN/HR button to adjust the hour.
Note: When in the 12-hour mode and setting an alarm for a time between noon and midnight, “PM” will appear
to the left of the alarm time in the DATE LCD.
4. Press and release the OUT/MIN button to adjust the minutes.
5. Press and release the SNOOZE/CH button to confirm the setting or wait for 15 seconds and the display will
automatically return to the normal mode.
To activate the alarm:
1. Press and release the ALM/+ button to toggle between the alarm time and the day and date.
2. When the alarm time and alarm icon are showing in the DATE LCD the alarm is activated.
3. When the day and date are showing in the DATE LCD the alarm is deactivated.
To activate the snooze:
1. While the alarm is sounding press and release the SNOOZE/CH button.
2. The snooze will be activated and the alarm will come back on after the selected time period.
VII. ADDING REMOTE TEMPERATURE/HUMIDITY SENSORS (OPTIONAL)
The WS-9043U is able to receive signals from 3 different remote temperature/humidity sensors. The remote
temperature/humidity sensor model(s) that you choose will come with their own set of instructions—follow these
instructions for a complete guide to setting up. Following are some brief instructions for the basic set-up of remote
temperature/humidity sensor units with the WS-9043U. These extra sensors can be purchased through the same dealer as
this unit, or by contacting La Crosse Technology directly. A TX4U will monitor temperature and humidity, a TX6U will