Lowrance electronic iFINDER Go Handheld Mapping GPS Receiver - Manual (Page 10)

8
selected. Once that happens, if you press FIND the Find Menu will pop
up with an extra option at the top of the list: S
ELECTED
I
TEM
. Press ENT to
see the Waypoint Information screen for the selected item.
Set Home Waypoint
A waypoint is simply an electronic "address," based on the latitude and
longitude of a position on the earth. Easy Mode allows you to save two
waypoints (Home and Man Overboard). To save a Home Waypoint: 1.
Press and release
ENT . 2. The S AVE A S H OME W AYPOINT ? menu appears,
with Y
ES
highlighted. To accept yes, press ENT . The waypoint appears
on the map as an X, named "Home."
Save Home Waypoint menu, left. At right, Home waypoint, with X
symbol and name. When selected by the cursor, the pop-up box appears.
The example shows waypoint set at the cursor location. If cursor was
not active, the point would be placed at the current position.
Caution:
Saving a new "Home" waypoint will overwrite and erase the
previous "Home" waypoint.
Navigate Back Home
This command will automatically take you back to the "Home"
waypoint you created.
1. Press
FIND | ENT ; then follow navigation arrows on the Map Page or
the compass rose on the Navigation Page.
To stop navigating to the waypoint, use the Cancel Navigation command.
Pop-up box