Linn Klout - Manual (Page 5)

iii
11. Grounding or Polarization. Do not defeat the precautions taken to ground or
polarize the supply to the appliance.
12. Power Cord Protection. Route power cords so that they are not likely to
be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, power sockets and at the point where
they exit from the appliance.
13. Protective Attachment Plug. As a safety feature the product is equipped
with an attachment plug containing overload protection. See the instruction
manual about resetting or replacing the plug. Should the plug need
replacing ensure that a replacement is used which has the same overload
protection as the original.
14. Cleaning. The product should be cleaned only as recommended by the
manufacturer.
15. Power lines. An outdoor antenna should be located away from power lines.
16. Outdoor Antenna Grounding. If an outdoor antenna is connected to the
tuner/receiver ensure that the antenna system is grounded to provide some
protection against voltage surges and static build up.
In the USA see article 810 of the National Electrical Code ANSI/NFPA 70
concerning installation requirements.
17. Non-use periods. Unplug the power cord from the outlet if the product will
be unused for a long period of time.
18. Objects and liquid entry. Take care not to let objects or liquids fall into the
product.
19. Damage requiring service. The product should be serviced by qualified
personnel if:
a) the power cord or plug has been damaged.
b) objects or liquid have fallen into the product.
c)
the product has been exposed to rain.
d) the product does not appear to operate normally or exhibits a marked
change in operation.
e) the product has been dropped or the enclosure damaged.
20. Servicing. Don’t attempt to service the product beyond that described in the
operating instructions. All other servicing should be referred to qualified
service personnel.