Lumiscope 1145 User Manual

Page 6

NOTE: When volume level 0 is selected, the unit is
on mute and you will not hear any voice messages
announced.

Taking A Blood Pressure Measurement
You can choose to take your blood pressure while sitting
or lying down. Below are some helpful tips for taking a
measurement:

• Be sure to set the clock before taking your first

measurement, or whenever you replace the batteries,

so that the date and time are stored in the memory

with your history. For instructions, refer to p. 8.

• It is important to relax when taking your blood

pressure. Try to take a 15-minute rest before you

begin.

• Do not lean backward or bend your wrist inward while

taking a measurement.

• Avoid talking or moving your fingers and hand while

taking a measurement. Rapid movements or other

activities may alter your reading.

• Wait at least an hour before taking your blood

pressure if you have just eaten a large meal.

• Do not smoke or drink alcohol before taking your

blood pressure.

• Do not measure your blood pressure if you are under

stress.

• Wait at least 3 minutes between measurements. This

allows your blood circulation to recover.

• For a meaningful comparison, try to measure

under similar conditions. For example, take daily

measurements at approximately the same time, on

the same wrist, or as directed by a physician.

• To stop the measurement process at any time, press

• The unit automatically switches off 1 minute after

taking a measurement. To save the battery life, press

as soon as you are finished to turn off the unit.

To take a measurement:

1. Choose the position you from which you wish to

measure - sitting or lying down.

2. Position your body so that your wrist is parallel with

your heart, using the chart and illustrations below as

a guide.

3. Relax your hand and press to turn on the unit.
A voice message will remind you to relax and remain

still. It then begins inflating the wrist cuff. Once the
pressure reaches 180 mmHg, it will slowly deflate
until the measurement results show on the LCD.

Voice Playback Of Blood Pressure

Measurements

The 1145 features voice playback during and after
blood pressure measurement results, as well as
general instructions to help you prepare for taking
measurements. When the unit has finished taking your
measurement, your blood pressure readings, pulse and

blood pressure classification are announced.

If you want to repeat the announcement, simply press
TALK / VOLUME.

Anytime you recall a measurement record from memory,
it will also be announced. Press TALK / VOLUME if you
need to repeat the playback of any record.

Volume Control
To adjust the volume level:
1. Press and hold TALK / VOLUME until volume level

flashes on the LCD.

2. Press TALK / VOLUME to adjust volume level.
3. Press when you have finished adjusting the

volume.

(MUTE)

(Volume is LOW)

(Volume is HIGH)