La Crosse Technology WS-7038U User Manual

Page 12

TROUBLESHOOTING
Problem:

The LCD is faint.

Solution:

1) Replace batteries.

Problem:

“OFL” appears in LCD.

Solution:

1) Follow Reset directions. (Total rainfall accumulation has
exceeded 999.99in.)

Problem:

“---” Appears in LCD (rain monitor has lost signal from gauge)

Solution:

1) Follow reset directions.
2) Distance the Rain Monitor or Rainfall Sensor at least 6 feet (2m)
away from interfering sources on a 433 MHz signal (computers, TV
sets, headphones, speakers, etc.).
3) Move receiver away from metal window frames.
4) Neighbors using 433 MHz devices can interfere also.

Problem:

Need to reset the bar graph (EEPROM Rain Monitor memory)

Solution:

1) Remove batteries, and follow instructions in section III, under
Features & Operations.

Problem:

Rainfall amount is not correct.

Solution:

1) Manually change the rain multiplicator number to 105, following
instructions in section II, under Features & Operations.

Note:

For any questions not answered, contact La Crosse Technology with the contact

information found at the end of this instructional manual.