English – Lennox Hearth 50 User Manual
Page 11

ENGLISH
9
Tr o u b l e s h o o t i n g
Some of the problems that may arise when using Konftel 50 are described below.
Calls are audible through the telephone headset but not through Konftel 50
1. Is Konftel 50 properly connected? See the page on connecting
telephone.
2. Are the LEDs red? If so the mute button is activated. Press in
to deactivate.
3. Are the LEDs green? Check the selector switch position on the bottom of
the switchbox. The Selector switch position can be set to I or II
depending on the system telephone you connect your Konftel 50 to.
Manufacturer
PBX type
Selector
switch position
ERICSSON
MD110
I
FENIX
I
NORTEL
MERIDIAN 1
I
COSMOS
I
PHILIPS
SOPHO
II
ERGOLINE
I
ALCATEL
4200
I
4400
I
SIEMENS
HIPATH
I
HICOM
I
For other switch types, first select position I and then position II.
4. Have you added extension cables to the system?
Remove them and reconnect to see if the system is working.
I
II
I
II