Lenco Marine PL 4201 - Manual (Page 23)

23
Brightness, Contrast, Colour and Sharpness/DNR
1
Select BRIGHTNESS. Then press or to adjust the
brightness.
If you wish to set the CONTRAST, COLOUR, TINT, or
SHARPNESS, press
or to select
CONTRAST, COLOUR, TINT, or SHARPNESS.
The menu “TINT” can be selected at AV-Playback, if a
NTSC 3.58MHz signal comes in through a AV socket and
NTSC or AUTO was selected at AV COLOUR (see P.37).
2
Press MENU repeatedly until the MENU disappears.
Notes:
• To centralize these picture adjust-
ments, press NORMAL in step 1.
• In HDMI mode, the “DNR”-option can
not be selected.
DNR
DNR (Digital Noise Reduction) can reduce the roughness of
the picture.
1
Select DNR. Then press or to select ON or
OFF.
2
Press MENU repeatedly until the MENU disappears.
Brightness, Contrast, Colour and Sharpness
B R I G H T N E S S 2 5
C O N T R A S T 2 5
C O L O U R 2 5
T I N T 0
S H A R P N E S S 2 5
D N R O F F
: R E T U R N M E N U
: A D J U S T : S E L E C T
: R E S E T N O R M A L
B R I G H T N E S S 2 5
C O N T R A S T 2 5
C O L O U R 2 5
T I N T 0
S H A R P N E S S 2 5
D N R O N / O F F
: R E T U R N M E N U
: A D J U S T : S E L E C T
3U84011A [E] P19-25 20/12/05, 15:21 23