Life Fitness Dual Adjustable Pulley - Manual (Page 6)

Dual Adjustable Pulley
1. Assembly Instructions
6. SHROUD ASSEMBLY:
SECURELY assemble the FRONT SHROUD (24) and the REAR SHROUD (25) to
the LEFT SIDE TOWER (2) using twelve 3/8 X 90mm BUTTON HEAD BOLTS (26),
twenty-four 3/8" BLK WASHERS (27) and twelve 3/8" ACORN NUTS (28) as
shown.
SECURELY assemble the TOWER CAP (29) to the LEFT SIDE TOWER (2) using
two 3/8 X 25mm BUTTON HEAD BOLTS (30) and two 3/8" BLK WASHERS (27).
Repeat these steps on the RIGHT SIDE TOWER (3).
7. Assemble one SEWN HANDLE (31) to the CABLE end on the LEFT SIDE TOWER
(2), using one SNAP LINK (32) as shown.
Repeat this step on the RIGHT SIDE TOWER (3).
27
29 27 26
25
30
28
27
24
31
32
A