Lowrance electronic LCX-111C - Manual (Page 142)

134
3. Upon arrival at your destination, cancel navigation:
press
MENU | MENU |
↓ to
C ANCEL N AVIGATION
| ENT | ←
to Y ES
| ENT .
Navigate a Route in Reverse
Here's how you run a route backward, from the end waypoint to the
beginning waypoint:
1. From the N
AVIGATION
P
AGE
(
WITH DIGITAL DATA
) , press MENU | ENT or from
the M
AP
P
AGE
, press MENU | MENU |
↓ to
R
OUTE
P
LANNING
| ENT .
2. Press ↓ to select route name| ENT | ↓ to N AVIGATE
| → to R EVERSE
| ENT | ←
to N
AVIGATE
| ENT . A navigation option window will appear asking if you
want to be prompted or directed to intermediate waypoints along the
trail. Use
→ ← to make your selection, then press
ENT . After making
your selection, the unit will begin to show navigation information along
the trail.
3. Upon arrival at your destination, cancel navigation:
press
MENU | MENU |
↓ to
C
ANCEL
N
AVIGATION
| ENT | ← to Y
ES
| ENT .
Fig. 1 shows the Navigation Page at the start of a route, heading
straight for the waypoint 11. In Fig. 2, the traveler has arrived at the
destination and the arrival alarm has been triggered.
Trails
Delete a Trail
This is the command used to delete a trail. Press
MENU | MENU |
↓ to
M
Y
T
RAILS
| ENT |
↓ to trail name|
ENT | → to D
ELETE
T
RAIL
| ENT |
← to
Y
ES
| ENT .
Tip:
You can also delete all trails at once.
1. Press
MENU | MENU |
↓ to
M Y T RAILS
| ENT .
2. Press → to D
ELETE
A
LL
| ENT |
← to
Y
ES
| ENT .
Figure 2.
Figure 1.